Eaton Sefelec SXS506 - 12 Input Output Interfaces

XS series operating manual
XS user manual v0.55 - 92 -
12 Input output Interfaces
Input-Output for Programmable Logic Controller Interface (PLC)
This option gives a functional control of the measurement unit by a Programmable Logic Controller
system.
WARNING
The PLC interface must be selected in the SETUP menu, line INTERFACE :PLC
Electrical specifications
INPUTS :
 Number : 7
 Type : Optoelectronic
 Input resistance : 1.5 kohms
 Minimum voltage : 11 VDC or 8 VAC
 Maximum voltage : 43 VDC or 30 VAC
OUTPUTS:
 Number : 5
 Type : Dry contacts
 Maximum voltage : 70 VDC
 Switching rating : 30W
 Maximum current : 0.15 ADC
Description of the logical states
Input :
Logical state HIGH : DC or AC voltage with an amplitude between Umin and Umax.
Logical state LOW : no voltage.
Output :
Logical state HIGH : closed contact.
Logical state LOW : opened contact.
.