XS series operating manual
XS user manual v0.55 - 93 -
Connections
The Input Output signals are available on the unit rear panel on screw terminals C6 and C7.
Warning : each screw terminal has a key to avoid wrong connection.
Connector C6
Connector C7
(1)
Internal 25VDC power supply none regulated and protected by Polyswitch fuse with a maximum
current of 1A. If the Polyswitch breaks the circuit in case of over current, please reduce the external
current consumption and wait for a few minutes before trying again
(2)
DTR input: not used in the XS series. Don’t connect any signal on that pin.
To Next Page
Loading...