Need help?Do you have a question about the EBS Active Track and is the answer not in the manual?
Key safety advice for device usage, including prohibitions and precautions.
Details about setting and using the device's PIN code for initial access.
Explains the AES algorithm for data security and transmission over GSM networks.
Details the device's GPS receiver and its capability to specify location worldwide.
Details physical components like GPS button, Call to me button, Panic button, LED indicator, etc.
Provides instructions and safety advice for installing the SIM card and battery.
Explains the process of charging the device and notes on using approved chargers.
Explains how to configure the device via SMS or GPRS for server connection.
Details the GPRS transmitters configurator software, its download, and installation.
Covers setting up remote configuration via GPRS or CSD channels.
Details the configuration steps for establishing GPRS connections to the analyzer.
Covers parameters related to device access and connection modes.
Details security settings for data transmission, including AES encryption.
Allows configuration of accelerometer, microphone, and loudspeaker settings.
Explains accelerometer settings for detecting emergencies like lack of motion or improper position.
Configures ManDown functionality to monitor guard's motion and signal alarms.
Configures tilt detection to signal incorrect rest position of the device.
Configures microphone sensitivity, speaker volume, and event signaling.
Sets parameters for generating LOCATION UPDATE events based on distance, timeout, or speed.
Generates a LOCATION UPDATE event after the device moves a defined distance.
Generates a LOCATION UPDATE event after a specified time interval has passed.
Generates LOCATION UPDATE events based on changes in speed or direction of movement.
Determines which signals generated by the device are transmitted to the monitoring station.
Allows selection of signals to be reported via GPRS, SMS, or priority channels.
Sets restrictions for incoming calls and SMS messages.
Specifies phone numbers for automatic call answering and authorized SMS senders.
Configures phone numbers for emergency calls and SMS location sending.
Sets emergency numbers for calls and SMS content for location transmission.
Enables automatic device actions when communication with the monitoring station is lost.
Details the process of updating and changing the device's firmware.
Covers programming the device using the GPRS transmitters configurator software.
Provides step-by-step instructions for programming the device locally.
Explains how to perform remote programming using GPRS or CSD channels.
Details the initial device setup and registration with the OSM.2007 system.
Describes how to reprogram the device at any time after initial setup.
Provides real-time information on the Active Track device state and logs.
To Next Page
General