48
Active Track (beta version)
© 2013 EBS
9.2.3.5.1.1 GPRS On / GPRS Off
In this column you define signals that are to be reported to monitoring station with
GPRS transmission. There is possibility to send information for alarms (e.g. the
“Panic” button being pushed) as well as in some cases for return to normal state (e.g.
turning off the sabotage switch).
To transmit any signal you should only click it (proper square on your right).
Click on [Clear] button to remove all marked signals.
Click on [Invert] button to change markings to contrary.
9.2.3.5.1.2 SMS On / SMS Off
In this column you define signals that may be reported at monitoring station with SMS
messages – when there is no connection with server over GPRS. There is possibility to
send information for alarms (e.g. the “Panic” button being pushed) as well as in some
cases for return to normal state (e.g. turning off the sabotage switch).
To transmit any signal you should only click it (proper square on your right).
Click on [Clear] button to remove all marked signals.
Click on [Invert] button to change markings to contrary.
9.2.3.5.1.3 On priority / Off priority
These columns define which signals are to be reported to the monitoring station as
first. A priority can be set both for alarms (e.g. the “Panic” button being pushed) as
well as in some cases for return to normal state (e.g. turning off the sabotage
switch).
Pressing the [Clear] button deletes all the criteria marked in a given column.
9.2.3.5.2 Additional data
The Additional data functionality allows for defining kinds of additional data which will
be transmitted together with events to monitoring station via GPRS/SMS. The data
may become valuable information about device's work conditions though it may
increase amount of bytes sent through GSM network. It is possible to define two
separate sets of additional data kinds: for test events (sent periodically according to
setting on Access tab) and for other events. Put a mark next to the name of data
kind to turn on transmission of this data kind to monitoring station. Empty field means
that this kind of data will be not transmitted.
35
To Next Page
Loading...