63
Configuration
© 2013 EBS
10 Controlling commands
Active Track can receive control messages through SMS messages or GPRS link
(e.g. by using Console of monitoring receiver OSM.2007). These messages can enable
additional functions of device or request additional information about device
condition.
BEEP=f,d,n,v
Generates acoustic signal with f frequency, d signal length (in multiply of
100ms), n repeats and v volume.
DISC
Disconnects device from server.
FLUSH=x
Clears the FIFO queue, where x means that the queues to be cleaned:
0 - the queue of outstanding events to be sent to the server
1 - events history (see Events history )
Example: FLUSH=0
CONNECT
Force immediately attempt of connection to server.
KILL
Sending this command remotely resets the device.
CMD = AT_command
Sending it makes the device modem follow this command and return report of
action result. Particular commands has been blocked due to safety reasons and
would be reported as <blacklisted> if received.
Example:
CMD=AT+CSQ (enables remote reading of the device GSM signal level).
VER
Sending this command makes the device send software version as a reply.
DESC
Sending this command downloads the device description in Active Track v.VER
GETCFG
Sending this command returns current device configuration. Parameters are
returned in following style: SERVER:PORT APN UN PW SMS TPERIOD
61
To Next Page
Loading...
