EBS Active Track - Configurable Parameters; Access and Connection Parameters

35
Configuration
© 2013 EBS
9.2.3 Programmable parameters
Parameters available in configuration program are divided into three groups: Access,
Transmission, Device parameters, Monitoring, Restrictions, Notifications, Link control
and Firmware. Each of these groups will be described in detail in next part of this
manual.
9.2.3.1 Access
9.2.3.1.1 Parameters
9.2.3.1.1.1 Device mode
Depending of user preferences, a device may operate in 1 out 3 modes (available
from scrolled list):

GPRS & SMS: GPRS standard transmission (TCP/IP Protocol), and if any
problems follow with this link it automatically SMS mode will follow.

SMS: Transmission only in SMS mode, without trial to establish GPRS link.

GPRS: GPRS standard transmission (TCP/IP Protocol), and in case of any
problems with this link no transmission will follow.