Ebtron Advantage IV Series User Manual

TABLE 3-1 Factory Defaults, Optional Settings and Ranges
Parameter
Product
Line
Probe
Type
Special Criteria Default Optional Settings/Ranges Units
-P, -T, -U, -F
DIRECTION=UNI
DIRECTION=BI {-AO1 FS}
-P, -T, -U, -F
AO1 ASGN=F1-2 or
F2-1
{-AO1 FS}
-T, -U, -B 3000 [15.0]
-P 5000 [25.0]
-F 10000 [50.0]
-T, -U, -B 3000 [15000] x Area
-P 5000 [25000] x Area
-F 10000 [50000] x Area 5 to 999999 [5 to 999999]
-B AO1 UM=iWG[Pa] 1.50 [300] 0.05 to 5.00 [10 to 1250] iWG [Pa]
TEMP ALRM or TRBL
Dual Location 2 of 2 AF2 F1-2, F2-1
-B TEMP ALRM or TRBL
/SI, /DI TEMP ALRM or TRBL
Dual Location 2 of 2
(/SI, /DI only)
AF2 F1-2, F2-1
/An TEMP ALRM, FA or TRBL
-P, -T, -U, -F Dual Location 2 of 2 FPM [m/s]
CFM [L/s]
9
All AO2 ASGN=TEMP F [C] None
AO2 ASGN=AF2 0
AO2 ASGN=F1-2 or
F2-1
{-AO2 FS}
All AO2 ASGN=TEMP -20 [-30] -50 to 160 [-50 to 70]
°F [°C]
-T, -U 3000 [15.0]
-P 5000 [25.0]
-F 10000 [50.0]
-T, -U 3000 [15000] x Area
-P 5000 [25000] x Area
-F 10000 [50000] x Area
All AO2 ASGN=TEMP 160 [70] -50 to 160 [-50 to 70]
°F [°C]
NO FAULT All All
AO2 ASGN=ALRM or
TRBL
HI LO
ANALOG OUTPUT
Dual Location 2 of 2
and AO2 UM=CFM
[L/s]
5 to 999999 [5 to 999999] CFM [L/s]
Note 9: The default and only option for AO2 UM is FPM [m/s] when the AREA parameter is set to 0 or {null}.
AO2 MS All
-P, -T, -U, -F None
AO2 FS All
Dual Location 2 of 2
and AO2 UM=FPM
[m/s]
100 to 15000 [0.5 to 75.0] FPM [m/s]
All
-P, -T, -U
-F
AO2 UM All
AO1 FS All
AO1 UM=FPM [m/s] 100 to 15000 [0.5 to 75.0] FPM [m/s]
AO1 UM=CFM [L/s]
5 to 999999 [5 to 999999]
CFM [L/s]
AO2 ASGN
AO1 MS All
0
None
-B
SettingsMenu_r1p Table 3-1 - Page 3

Ebtron Advantage IV Series Specifications

General

Brand	Ebtron
Model	Advantage IV Series
Category	Measuring Instruments
Language	English