Chengdu Ebyte Electronic Technology Co.,Ltd E180-Z6907A User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co., Ltd.
7-28
(5) After the node type is modified, the module needs to be restarted to take effect. Click “Module Restart”, and the
message box prompts “Module restart successful”.
(6) After the module restarts, the transfer mode is entered by default. At this time, click “Enter Configuration
Mode” again, the message box prompts “Enter the configuration status successfully, read parameters successfully”. It can
be seen that the parameters read are the previously modified parameters, indicating that the network parameters are
modified successfully.
To Next Page
Loading...
