ECKELMANN CI 4000 Series - Page 19

Firmware V6.6.9
29.07.2020
19/147
•
•
•
•
Replacement for CI 3000 (2, 6, 16 MB)
without connected compact controllers
without LAN / Combi gateway
X X X X
Load shedding manager and water stop X X X X
BCT (building control technology) X X X X
Replacement for CI 3000 (2, 6, 16 MB ) / CI
3100 (6, 16 MB)
with connected compact controllers,
Modbus interface for UA 30 Rx
compact controller / LDS1 gateways /
Dixell
withoutLAN/Combigateway
- X X X
Interface for Wurm / Danfoss third party
controllers
- X X X
Ethernet / LAN interface
Replacement for CI 3000 / CI 3100 Store
Computer with LAN / Combi gateway
IMPORTANT:LAN/Combigatewaymustbe
removed from the E*LDS system!
Details for the exchange, repair and
replacement of a CI 3x00 store computer can be
found here.
- - X X
Two CAN bus segments (connection to
terminals CAN1 and CAN2)
with repeater function
- - - X
Summary
CI 4000
S0 / M-bus meter, GLT, successor for CI 3000 (without Modbus compact controller)
CI 4100
CI 4000 + Modbus, successor for CI 3100 (with Modbus compact controller)
CI 4400 CI 4100 + LAN
CI 4500 CI 4400 + CAN bus repeater function
It is possible to upgrade at any time, for example from CI 4000 to CI 4400. Only a new licence key that
can be obtained from Eckelmann AG has to be entered for this in the menu 4-1-12. The part numbers
of the individual expansion stages are listed in chapter System centre part numbers and accessories.
