•
•
→
→ →
* Login to the system centre is required, see chapter Login to the system centre (unlocking).
9.1.5 Overview of the menu tree
Main menu Submenu 1 Submenu 2 Submenu 3 Menu number
1 Alarms and messages 1 - Alarms and messages
Current alarms
Message list
- - 1
2 System overview 2 - Overview and monitoring of the system (read-only!) 2
1 - Node overview Node overview - 2-1
2 - Case controllers Case controller overview Detailed information 2-2
3 - Pack controllers Overview of pack controllers Detailed information 2-3
4 - Receiver module
wireless sensors
Overview of receiver module
wireless sensors
Detailed information 2-4
5 - Other LDS
components
Overview of other components Detailed information 2-5
6 - EU archive Overview of EU archives Detailed information
EU archive (HACCP)
2-6
7 - Signal inputs Overview of signal inputs - 2-7
8 - Special inputs Overview of special inputs - 2-8
9 - General information - - 2-9
10 - Log - - 2-10
3 24h list
Overview of 24h list Temperature data of a
refrigeration point
- 3
4 Configuration 4 - Configuration System 4
Configuration Configuration System 4-1
1 - System Centre 1 - Configuration System centre configuration 4-1-1
2 - Signal inputs Signal inputs 4-1-2
In this operating manual, all references to menus or entry screens and their functionalities and/or the
parameters to be set there use the type of numbering presented here.
The user must first be logged in at the system centre, see chapter Login to the system centre
(unlocking), to be able to make changes to the system centre or to E*LDS components
To Next Page
Loading...
