Section 14. Primary Flight Display (PFD) Eclipse 5OO Systems Manual
Copyright © — Eclipse Aviation Corporation
Version 2.0 April 2007 307
Marker Beacon Receiver
A marker beacon display appears below the ADI, if an ILS or localizer is selected
as the primary navigation source and/or if an ILS or localizer approach is loaded
in the FMS. When activated, the marker beacon receiver sensitivity is
automatically set to LO, the marker beacon audio is automatically turned on, and
the following signals are detected and displayed:
Outer Marker ........................................................... Blue display labeled “OM.”
Figure 197. Outer Marker Display on PFD
Middle Marker ......................................................Amber display labeled “MM.”
Figure 198. Middle Marker Display on PFD
Inner Marker............................................................ White display labeled “IM.”
To Next Page
Loading...
