Introduction
16
2 When using for the first time
Loading the program into the device
After purchasing the device and using it for the first time, load the map
disc program into the device.
Turn the engine ON.
Touch to
open the display and insert the
map disc into the map disc slot.
• The device will start reading the program.
• A progress bar will appear as the program is being
read.
• On completion of program reading, the opening
screen is displayed.
While program loading is in progress, do not turn the engine OFF or operate any
other switch.
Screen after turning the power ON
1
Program reading in progress screen (approx. 70 seconds)
Progress bar
2
DISPLAY OPEN/CLOSE
Opening screen (approx. 10 seconds)
To Next Page
Loading...
Need help?
General
