ETEK5 MANUAL 5
MAINTENANCE
A guide to performing routine maintenance on your ETEK5.
37 Cleaning the Breech Sensor (BS)
39 The SL4 inline regulator assembly
41 Advanced SL4 inline regulator maintenance
42 Cleaning the low pressure regulator
44 Cleaning and lubricating the bolt
45 Maintaining the rammer
47 Removing and attaching the frame
49 The ETEK5 trigger assembly
51 The ETEK5 solenoid assembly
53 Maintaining the valve assembly
56 The ETEK5 On/Off Purge System (OOPS)
FAULT FINDING
How to resolve any problems that may arise with your ETEK5.
58 Tables containing symptoms, possible causes and solutions
SERVICE CENTRES
Information on the location of your nearest ETEK5 Service Centre.
62 Planet Eclipse Service Centres
TECHNICAL RESOURCES
Essential illustrated diagrams and component lists for the ETEK5.
63 Operational overview
64 Parts lists
66 The Shaft4 barrel
67 SL4 inline regulator
68 ETEK5 bolt assembly
Zick3 rammer assembly
69 ETEK5 solenoid assembly
70 The On/Off Purge System (OOPS)
71 Trigger assembly
Clamping feed tube assembly
72 ETEK5 board
ETEK5 board with OLED board tted
73 Common o-ring size chart
74 Common screw size chart
75 ETEK5 OLED board parameter overview
WARRANTY CARD
Tear-out product registration card to be completed and returned.
Alternatively register online at
www.planeteclipse.com
INDEX
NOTES
To Next Page
Loading...
Need help?
General
