TECHNICAL RESOURCES
ETEK5 MANUAL 75
SEMI ∞ Uncapped Semi-Automatic: one shot per trigger pull (no rate of re cap)
SEMI 15.0 Capped Semi-Automatic: one shot per trigger pull (15.0bps cap)
WPBO 10.2 Capped Ramping: WPBO compliant (10.2bps cap)
NXL 10.2 Capped Ramping: NXL compliant (10.2bps cap)
MILL 10.2 Capped Ramping: Millennium Series compliant (10.2bps cap)
PSP 12.2 Capped Ramping: PSP compliant (10.2bps cap)
4.0 - 15.0 bps Maximum rate of re with Breech Sensor on. (Default 15.0bps)
4.0 - 15.0 bps Maximum rate of re with Breech Sensor off. Default 10.0bps
3.3 - 10.0 pps Rate at which the trigger has to be pulled in pulls per second (pps) before ramping can start (Default 3.3pps)
0.0 - 1.0 s Time in seconds (s) after the last trigger pull during which ramp can be restarted. (Default 1.0s)
8.0 - 16.0 ms Solenoid energise time in milliseconds (ms) for each shot. (Default 12.0ms)
1-10 Trigger anti-bounce setting (1 = lowest level of ltering / 10 = highest level of ltering)
(Default 5)
0 - 60 m Auto power off time in minutes (Default 20m)
SHOTS Display the shot counter
ROF Display the rate of re (ROF) indicator
NONE Don’t zero anything
SHOTS Zero the shot counter
ROF Zero the ROF indicator
BS ON ROF
BS OFF ROF
KICK IN
RESTART
DWELL
DEBOUNCE
SLEEP
DISPLAY
ZERO
PRESET
ETEK5 OLED BOARD PARAMETER OVERVIEW
To Next Page
Loading...
Need help?
General
