• Always use the unit with active safety protections. Never modify the unit.
• The unit is designed to be used by one operator. It is advised that others keep themselves at a
distance while the unit is in use.
• Always connect the A/C circuit with the couplers which are on the end of the low and high pressure
hoses. Do not use them for other operations.
• Never interfere with the refrigerant internal tank. Never fill the tank to more than 80 % of its
maximum capacity.
• During the operations, check the level of the recovered oil tank to make sure it does not over spill.
• During the operations, check the level of the recovered oil tank to make sure it does not over spill.
• Do not leave the unit stored inside an unventilated vehicle exposed to the sun. High temperature
and high pressure conditions will cause the opening of the safety valve and the loss of refrigerant.
5.3. Power supply
• Check that the power connection includes all the required safety protections including grounding and
circuit breaker.
• When using extension cords, check cable’s section according to its length. Lay the extension cord in
a way that is safe, avoiding traffic areas and wet areas.
• Do not open the chassis while the unit is in use or is plugged in.
• Check power cable before plugging in the unit.
• In case of an electricity cut, the current operation will not be saved. You will need to start again.
To Next Page
Loading...