ECOCLIM AC134HD - Maintenance; Maintenance Information

EN_
810G20 - Version V5 – Juillet 2020 P. 73
Traduction de la notice originale
Select 3.
Select 1.
Select 3.
Consult the table below for the access codes corresponding to settings or
tasks to modify.
Enter the access code, confirm with ENTER, you can then modify a
parameter or carry out a cycle.
PARAMETRE
FACTORY
VALUE
ACCES
CODE
Setting the tank scales to zero
9220
Calibration of tank scales
3220
Calibration of recovered oil scale
3480
Calibration of manifold pressure sensor
2276
Calibration of tank pressure sensor
2272
Updating main programme
6257
Drained oil density (grams to millilitres converter)
990 kg/m³
1108
Note: The “drained oil density” parameter has to be set of information match with the oil density used.
(Ex : SP10 iso 46 = 990kg/m³, SP20 iso 100 = 1046kg/m³)
11.2. Maintenance
11.2.1. Maintenance information
This menu provides information from the unit’s maintenance counters.
From the homepage, access the menu by pressing ENTER.
Select 3.
Select 2.
Select 1.
>> MAIN MENU <<
1.ECS Operation
2.History
3.Settings ã
>> SETTINGS <<
1.User settings
2.Maintenance
3.Machine revisionsã
>> USER SETTINGS <<
1.Date and time
2.Printer settings
3.Machine settings
Password ?
____
>> MAIN MENU <<
1.ECS Operation
2.History
3.Settings ã
>> SETTINGS <<
1.User settings
2.Maintenance
3.Machine revisionsã
>> MAINTENANCE <<
1.Maintenance info
2.Reset maintenance
3.Counters