ECOCLIM AC134HD - Programming ECS Operations; Programming Operation

EN_
810G20 - Version V5 – Juillet 2020 P. 59
Traduction de la notice originale
9. Programming ECS operations
9.1. Programming operation
From the >> ECS OPERATION << menu, select 1.
To input an aircraft type during the procedure, select 1.
Otherwise 0.
Input aircraft type using keyboard if you have chosen to do so.
The key (C) allows you to correct. (20 characters max.)
To input a serial number during the procedure, select 1.
Otherwise 0.
Input serial number using keyboard if you have chosen to do so.
The key (C) allows you to correct. (20 characters max.)
To input OE/CT number during the procedure, select 1.
Otherwise 0.
Input OE/CT number using keyboard if you have chosen to do so.
The key (C) allows you to correct. (20 characters max.)
To input operator trigram during the procedure, select 1.
Otherwise 0.
Input OE/CT number using keyboard if you have chosen to do so.
The key (C) allows you to correct.
Select couplers configuration (indicate which couplers are connected to
ECS).
>> ECS OPERATION <<
1.New operation
2.Refrig transfer
Register aircraft
type ?
1.Yes
0.No
ENTER AIRCRAFT
TYPE :
°
Register
serial number?
1.Yes
0.No
ENTER
SERIAL NUMBER :
°
Register
OE/CT number?
1.Yes
0.No
ENTER
OE / CT NUMBER:
°
Register
operator trigram ?
1.Yes
0.No
ENTER
OPERATOR TRIGRAM :
°
Select couplers
1.HP
2.HP+LP
3. LP