28
3. Using the pull down selector, select the account to COPY TO.
4. Type in the name of new dispenser file that will be created.
5. Under copy options, select options that will apply. BE SURE TO ENTER THE CAPACITY OF THE NEW
WASHER.
6. When finished, CLICK on YES.
11 LOGGING ON TO A DISPENSER
LOGGING ON to a dispenser is the first step to sending dispenser files or printing reports. Make sure all
MultiLink cables are properly wired and PC module/power supply is connected to the PC.
From the ACCOUNT MANAGER page, CLICK on LOGON. The LOGON BOX will appear. ENTER the washer
number you want to upload the washer data HEX file. Enter dispenser access code, then click on connect.
The washer is on-line when the name of the washer appears to the left of pump icon.
HOW TO LOGON TO A DISPENSER
ENTER DISPENSER
I.D. AND ACCESS
To Next Page
Loading...
