53
SYSTEM SETUP
F. NAME - Enter pump product name up to 7 characters. Abbreviate if necessary. Example:
TCHARGE, TDRIVE.
G. FLOW RATE - Enter pump flow rate in 60 seconds. Flow rate is determined during calibration.
ALWAYS CALIBRATE PUMPS!
H. COST PER GALLON - Enter cost per gallon. Range is XXX. XX. Do not enter dollar sign.
I. TUBES CHANGE - Enter last squeeze tube change. Double click in this box for calendar.
J. TUBES LUBED - Enter last time squeeze tubes where lubed.
The following characters can not be used in the pump name description:
8. “
9. ‘
10. :
11. \
12. ,
13. <
14. >
To Next Page
Loading...
