46
EDIT MENU
A. COPY – Copies the current selection to the WINDOWS clipboard.
B. PASTE – Pastes the contents of the Windows clip board the current location.
VIEW MENU
A. WASHER – Selects Washer Setup Tab.
B. REPORT – Selects Report Setup Tab
C. FORMULAS – Selects Formula Names Tab.
D. SYSTEM – Selects System Setup Tab.
E. WASH FORMULAS – Opens Wash Formula Programming Tab.
F. TERMINAL – Opens Terminal menu.
G. VIEWER – Returns Screen to Viewer.
SETUP MENU
A. COM PORT – Allows selection of network communications port. This function is done automatically by the
EcoJet / EcoStar 1500 software.
B. MODEM – Allows selection of system modem communications port.
C. SET CLOCK – Sets the dispenser clock.
D. CLEAR SETTINGS – Clears dispenser memory.
E. PRIME PUMP – Allows for remote priming of dispenser.
F. AUTO CALIBRATION – Initiates calibration procedure.
G. SIGNAL PUMP – Turns selected pump on for programmed time.
H. DIAGNOSTICS – Examines signals between signal interface and pump board.
I. CUSTOM – Allows selection of displayed items for viewer screen and daily reports.
To Next Page
Loading...
