EasyManua.ls Logo

Ecolab EcoJet EcoStar 1500 - SYSTEM; SOFTWARE REQUIREMENTS; SYSTEM REQUIREMENTS; COMPUTER REQUIREMENTS

Ecolab EcoJet EcoStar 1500
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
SYSTEM / SOFTWARE REQUIREMENTS
SYSTEM REQUIREMENTS:
(Utilities are a customer responsibility - cover thoroughly)
1. 120 VAC @ 20 Amps - Standard wall outlet. Four EcoJet / EcoStar 1500 units can operate from
one 20-amp circuit
2. 3/4” Hot & Cold water lines (3/4” pipe with 3/4” FPT ball valve)
þ HOT WATER TEMP MUST BE BETWEEN 95 and 110 DEGREES F.
þ IT IS RECOMMENDED THAT THE ECOJET / ECOSTAR 1500 UNIT BE ATTACHED TO
A SEPARATE WATER SUPPLY FROM THE WASHERS.
4. Water and electricity must be within 4 feet of EcoJet / EcoStar 1500 installation.
COMPUTER REQUIREMENTS
a. Hardware:
* Pentium
* 32 megabytes or more recommended
* One available Comm Port
* System Printer (Laser printer recommended)
* Requires 10 Megabytes of free Hard Drive space
* Max. network length is 1000 feet. (Host PC to last pump cabinet)
b. Operating System: Windows 3.1 or 95/98 (Windows 95/98 recommended)
c. Optional:
Ÿ Dedicated single analog phone line for remote access (customer responsibility)
Ÿ Hayes compatible Modem
Ÿ Microsoft Excel for Windows 3.1 (Report export to Excel) The 16 bit version of
EcoJet / EcoStar 1500 PC software WILL NOT export reports to Excel packaged with
OFFICE 97.
NOTE: The Version 3.0 EcoStar PC software will work with BOTH the EcoStar 1500 and the EcoJet
dispensers

Table of Contents

Related product manuals