50
WASHER SETUP
Use mouse or TAB key to navigate in screen. When all information is entered and verified, click on
OK or hit the ENTER key.
A. SYSTEM TYPE – The EcoJet / EcoStar 1500 Network software can program and communicate
with the EcoJet / EcoStar 1500 conventional washer dispenser.
B. DELAY UNITS - Select seconds (255 maximum) or minutes (255 maximum). For pump run delay,
choosing seconds will take care of most situations.
EcoJet / EcoStar 1500 Enabled
C. FLUSH -
1. ENTER FLUSH TIME AFTER (seconds) - time required to flush product to washer. Flush
begins during pump run and starts timing after pump stop. Factory Default 30 seconds
2. ERROR SAMPLING DELAY (seconds) - Factory setting of 3 second should be adequate.
This is the time EcoJet / EcoStar 1500 looks at Flow Switch contact closure.
To Next Page
Loading...
