Calibration Serinus 51 User manual 1.0
48
5.5 Serinus downloader program
The Serinus Downloader program is designed to allow the user to acquire data
directly from the analyzer and control it remotely. The Serinus downloader
program has four main windows; “Settings” where configurations are made to
communicate with the analyzer, “Data” where data is downloaded into a
spreadsheet and “Remote Screen” where the analyzer can be controlled
directly and “Remote Terminal” which is a diagnostic tool used to check
instrument operation and parameter values.
5.5.1 Settings
Within this window both the data format setting and analyzer communications
settings are defined. There are two icons in the main header, they are Save
Settings (which saves the current settings as default) and Cancel changes
Output
Output file: Enter in the destination (folder) including file name
(extension must be .txt) for the data to be downloaded into
Date Format: Enter in the date format that data will be written as (within
the text file).
Date must be separated by forward slashes, commas and time
by colon. and must contain:
Year yyyy
Month MM
Day dd
Hour HH
Minute mm
Second ss
The date can be used for one of three activities
Append Data Add data onto the end of the current
entries within the text file
Overwrite Data Always create new text file rather than
adding to existing file
Prompt User Displays a window that prompts user to
overwrite data, if no is selected data will
be appended to current .txt file
To Next Page
Loading...
