ECOWITT HP3501 - Factory Mode

43

ABS Barometer

REL Barometer

Wind speed

Gust wind speed

Solar Radiation

UVI (UV-Index)
5.7 Rainfall
The “Rainfall” summary page can be entered from the normal mode by
repeatedly pressing the MENU key. The page displays (left column) the
current rain rate, and accumulated values for rainfall for the day, week,
month and year. On the right hand side, you will find the largest value ever
seen (since device installation or reset) for each of these values, along with
date and time that maximum value was observed.
5.8 Factory Mode
The “Factory” mode page can be entered from the normal mode by
repeatedly pressing the MENU key.
Use the GRAPH or TEMP button to move to the next, or previous, option
(indicated by a right arrow above the button). The selected option will be
highlighted in yellow. Press the RAIN button to change or activate the
selected option. In all cases you will next be asked if you want to proceed
with the chosen action, answering “Yes” or “No” by using the “next,” and
“previous” buttons to highlight (in yellow) the desired answer and press “+”
to select that answer.
The following options are available:
 Factory Reset: Any and all customization to settings, calibration and
historical data will be erased and reset to factory default values.
 Clear Max/Min: Removes all recorded maximum and minimum values
(for temperature in “section 5.5” and “other” in “section 5.6”)