Note: Batteries for the wireless anemometer and the rain gauge sensor are
all not included. You will need 1 AA size battery, alkaline or
Lithium battery (Lithium recommended for the rain ) for each unit.
Note: The console operates using an AC adapter. The included adapter is a
switching-type adapter and can generate a small amount of electrical
interference with the RF reception in the console, when placed too
close to the console. Please keep the console display at least 2 ft. or
0.5 m away from the power adapter to ensure best RF reception
from the outdoor sensor package.
Note: There are two sets of U-bolts in the box, one is for the wireless
anemometer sensor and the other one is for the rain gauge sensor.
There’s a short stainless steel tube included for the rain gauge sensor
installation.
Note: The rain gauge can also be mounted to a surface using two screws,
so the included stainless-steel tube is not always necessary!
To Next Page
Loading...
