The direction of the batteries can not be reversed.
The software version number and frequency are displayed for 1 second,
then full-screen displayed for 3 seconds, and finally enter normal mode.
The console automatically opens the hotspot in 5 minutes to be paired by
the phone or the laptop, and contact with the wifi.
If the hotspot does not get any action, and will be automatically closed
after 5 minutes.
2.2.2 Download the Ecowitt App
Visit the App Store or Google Play Store or scan the QR code below to
download the free Ecowitt App onto your mobile device.
Open the Ecowitt App, follow the on-screen setup instructions to create
an account, add a new my device, and follow Section 2.2.3 or 2.2.4 below
to connect your station to your Wi-Fi network.
Figure 3: Download Ecowitt App
Note: For section 2.2.3 or 2.2.4 below, you’ll need your Wi-Fi network
name (SSID) and password. Make sure your mobile device is connected
to the same Wi-Fi network.
To Next Page
Loading...
