EDAN INSTRUMENTS SA Series User Manual

SA Series Ambulatory Blood Pressure Monitor User Manual EMC Information
- 51 -
Electromagnetic Immunity
Guidance and manufacture’s declaration - electromagnetic immunity
The SA series device is intended for use in the electromagnetic environment specified below.
The customer or the user of the SA series device should assure that it is used in such an
environment.
Immunity
test
IEC/EN 60601 test
level
Compliance
level
Electromagnetic environment -
guidance
Conducted RF
IEC/EN
61000-4-6
3 V
rms
150 kHz to 80 MHz
6Vrms
c)
in ISM
bands between
0.15 MHz and 80
MHz
Not
applicable
Portable and mobile RF
communications equipment should be
used no closer to any part of the SA
series device, including cables, than the
recommended separation distance
calculated from the equation applicable
to the frequency of the transmitter.
Recommended separation distance
Pd 2.1
150 kHz to 80 MHz
Radiated RF
IEC/EN
61000-4-3
3 V/m
80 MHz to 2.7 GHz
3 V/m
80 MHz to
2.7 GHz
Pd 2.1
80 MHz to 800 MHz
Pd 3.2
800 MHz to 2.7 GHz
See Table 1.
See Table 1.
E/6 Pd 
at RF wireless
communications equipment bands
(Portable RF communications
equipment (including peripherals such
as antenna cables and external
antennas) should be used no closer than
30 cm (12 inches) to any part of the SA
series device, including cables
specified by the manufacturer).
Where P is the maximum output power
rating of the transmitter in watts (W)
according to the transmitter
manufacturer and d is the

EDAN INSTRUMENTS SA Series Specifications

General

Brand	EDAN INSTRUMENTS
Model	SA Series
Category	Blood Pressure Monitor
Language	English