EDAN iM80 User Manual (English)

Other manuals for EDAN iM80

Questions and Answers:

X
xfletcherAug 30, 2025
How to resolve ECG waveform abnormality or interference on EDAN Medical Equipment?
- M
  malik74Aug 31, 2025
  If you're experiencing ECG waveform abnormalities or interference on your EDAN Medical Equipment, make sure the measurement electrodes are connected correctly. Remove any unused electrodes that are hanging in the air. Ensure you are using a 3-wire power cord for AC power and select the proper filter method. If the issue persists, the ECG module may be defective and require replacement.
Z
Zachary GarrettAug 31, 2025
What causes a big error in NIBP numeric value on EDAN Medical Equipment?
- J
  Joann ThompsonAug 31, 2025
  If there's a significant error in the NIBP (Non-Invasive Blood Pressure) numeric value on your EDAN Medical Equipment, first ensure that the cuff size is appropriate for the patient. If the cuff size is correct and the issue persists, the NIBP module may be defective and require replacement.
N
Nancy RollinsSep 1, 2025
What to do if some functions are invalid on EDAN Medical Equipment?
- H
  Heather WilliamsSep 1, 2025
  If some operation or measurement functions are invalid on your EDAN Medical Equipment, further examine the main control board and corresponding parts to identify the defect.
J
Janet WhiteSep 1, 2025
Why is there no ECG trace on my EDAN Medical Equipment?
- C
  Cheyenne RobinsonSep 1, 2025
  If there is no ECG trace on your EDAN Medical Equipment, ensure that the electrodes are properly connected, using new electrodes to ensure good contact. Verify that the ECG waveform is enabled in the system menu. Check that the RL electrode is well connected and not hanging in the air. If these steps don't resolve the issue, the ECG module may be defective and require replacement.
D
David KellerSep 2, 2025
Why can’t data be saved to the U disk in EDAN Medical Equipment?
- A
  Alexis CannonSep 2, 2025
  If data cannot be saved to the U disk on your EDAN Medical Equipment, the file format of the U disk may be incorrect (NTFS). Format the U disk to FAT. Also, ensure the U disk is properly inserted; try reinserting it or using a different U disk.

EDAN iM80 Specifications

General

Display Type	TFT LCD
Respiration	Yes
SpO2	Yes
NIBP	Yes
Temperature	Yes
Pulse Rate	Yes
EtCO2	Optional
Battery	Rechargeable lithium-ion battery
ECG	3/5 lead ECG
Optional Parameters	Cardiac Output
Networking	Wi-Fi, Ethernet
Weight	2.5 kg