Edge-Core ECS2100-28PP Reference Guide

Chapter 23 | Multicast Filtering Commands
IGMP Filtering and Throttling
– 577 –
show ip igmp profile This command displays IGMP filtering profiles created on the switch.
Syntax
show ip igmp profile [profile-number]
profile-number - An existing IGMP filter profile number.
(Range: 1-4294967295)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show ip igmp profile
IGMP Profile 19
IGMP Profile 50
Console#show ip igmp profile 19
IGMP Profile 19
Deny
Range 239.1.1.1 239.1.1.1
Range 239.2.3.1 239.2.3.100
Console#
show ip igmp
query-drop
This command shows if the specified interface is configured to drop IGMP query
packets.
Syntax
show ip igmp throttle interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10/28)
port-channel channel-id (Range: 1-8)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Using this command without specifying an interface displays all interfaces.

Edge-Core ECS2100-28PP Specifications

General

Model	ECS2100-28PP
Type	Managed Switch
PoE	Yes
PoE Budget	370W
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
MAC Address Table	16K
Operating Temperature	0°C to 50°C
Storage Temperature	-40°C to 70°C
Power Consumption	Max 400W
Jumbo Frame Support	9K
Management	CLI, Web, SNMP
Power Supply	AC 100-240V, 50/60Hz
Dimensions (W x D x H)	440 x 44 x 250 mm
Humidity	10% to 90% (non-condensing)