Configuring the Switch
3-32
• backendAuthSuccesses – The number of times that the state machine receives an
EAP-Success message from the Authentication Server. Indicates that the
Supplicant has successfully authenticated to the Authentication Server.
Dot1x MIB Counters
• EapolFramesRx – The number of valid EAPOL frames of any type that have been
received by this Authenticator.
• EapolStartFramesRx – The number of EAPOL Start frames that have been
received by this Authenticator.
• EapolRespIdFramesRx – The number of EAP Resp/Id frames that have been
received by this Authenticator.
• EapolReqIdFramesTx – The number of EAP Req/Id frames that have been
transmitted by this Authenticator.
• InvalidEapolFramesRx – The number of EAPOL frames that have been received
by this Authenticator in which the frame type is not recognized.
• LastEapolFrameVersion – The protocol version number carried in the most
recently received EAPOL frame.
• EapolFramesTx – The number of EAPOL frames of any type that have been
transmitted by this Authenticator.
• EapolLogoffFramesRx – The number of EAPOL Logoff frames that have been
received by this Authenticator.
• EapolRespFramesRx – The number of EAP Resp/Id frames that have been
received by this Authenticator.
• EapolReqFramesTx – The number of EAP Req/Id frames that have been
transmitted by this Authenticator.
• EapLengthErrorFramesRx – The number of EAPOL frames that have been
received by this Authenticator in which the Packet Body Length field is invalid.
• LastEapolFrameSource – The source MAC address carried in the most recently
received EAPOL frame.
Other Statistics
• Last Supplicant identity – MAC address of last authorized client.
To Next Page
Loading...
Need help?
General