Edgetech 3200-XS - About this Document; Liability; Revision History

v
ABOUT THIS DOCUMENT
We, the employees at EdgeTech, would like to thank you for purchasing 3200-XS Sub-Bottom Profiling
System. At EdgeTech, it is our policy to provide high-quality, cost-effective products and support services
that meet or exceed your requirements. We also strive to deliver them on-time, and to continuously look
for ways to improve them. We take pride in the products we manufacture, and want you to be entirely
satisfied with your equipment.
Purpose of this Manual
The purpose of this manual is to provide the user with information on the setup and use of EdgeTech’s
3200-XS. Although this manual encompasses the latest operational features of the 3200-XS, some features
may be periodically upgraded. Therefore, the information in this manual is subject to change and should
be used for reference only.
Liability
EdgeTech has made every effort to document the 3200-XS in this manual accurately and completely.
However, EdgeTech assumes no liability for errors or for any damages that result from the use of this
manual or the equipment it documents. EdgeTech reserves the right to upgrade features of this
equipment, and to make changes to this manual, without notice at any time.
Revision History
REVISION
DESCRIPTION
DATE
APPROVAL
A
Release to Production
03/09/2015
RM
B
Pin-out diagram updated
07/15/2015
RM
C
Updated drawings
08/25/2017
HS
D
Updates
05/01/2018
TS
E
Updates to Drawings
07/02/2018
TS