1-4
Selection Guide
BayStar Steering Kits
PID# HK4200A, HK4230A
BayStar Steering kits come complete with everything needed for an
install, (some engines require spacer kits and/or cylinder plate change,
see application chart on page 1-5) the compact cylinder does not
require the engine manufacturer drag link for connection. For your
convenience two lengths of 20' cut to fit tubing are supplied with
the HK4200A and two lengths of 30' cut to fit tubing are supplied
with the HK4230A kit.
OUTBOARD–FRONT MOUNT
HC4600 and HC4600H are no longer being made by Teleflex Canada,
all seal kits and spare parts will be made available. If purchase of a
new HC4600 or HC4600H is required, please purchase BayStar Compact
Cylinder part# HC4645H/47H/48H/58H as per the application chart
on page 1-5. If the cylinder that you are replacing does not include the
letter H after the part number, you will need to reuse the fittings out of
your old cylinder and/or purchase fitting kit # HF4201 (includes 2 of
the old style bleed fittings).
NOTICE
NOTICE
BayStar Steering Kit (HK4200A)
Includes:
1 x BayStar helm pump (HH4314)
1 x BayStar Cylinder (HC4645H)
1 x BayStar Tubing kit (HT4420H, comes with two 20' hoses)
2 x Hydraulic Steering Fluid (HA5430)
1 x Filler Kit (HA5438)
BayStar Steering Kit (HK4230A)
includes:
1 x BayStar helm pump (HH4314)
1 x BayStar Cylinder (HC4645H)
1 x BayStar Tubing kit (HT4430H, comes with two 30’ hoses)
2 x Hydraulic Steering Fluid (HA5430)
1 x Filler Kit (HA5438)
HC4645H compact cylinder is
included in both BayStar Steering
Kits. If your engine requires the
use of a cylinder other than
HC4645H or HC4658H (refer to
application guide on page 1-5)
then purchase of a replacement
Pivot Plate (noted on page 1-5)
will be required.
To Next Page
Loading...
