10-20
Selection Guide
SeaStar Power Steering
Purge Kit
Part# HA5456
SeaStar Power Steering
Purge Kit
Part# HA5457
SeaStar Helm Pump
Drill Jigs
•
Comes with 25' of hose to
go from the steering cylinder
to the reservoir.
•
Makes bleeding easier and
cleaner than before.
•
Makes bleeding even easier
than before.
•
Central bleeding location—no
need to run hoses to reservoir.
•
Can only be used with Power
Steering Cylinders made after
October 2005.
HA5405 HA5465 HA5466 HA5467
HA5468
HA5405 Mounting washer for SeaStar helm studs for applications
where the dashboard hole is 3-1/4 inches in diameter.
HA5465 Pilot Drill Jig for enlarging a 2 inch diameter dashboard hole
to a 3 inch diameter hole. As required for all standard SeaStar and
SeaStar Pro helms when using a standard 3 inch diameter hole saw.
HA5466 Drill Jig for drilling mounting holes for standard SeaStar
and SeaStar Pro helms. A 3 inch dashboard hole is required.
HA5467 Drill Jig for drilling mounting holes for standard SeaStar
and SeaStar Pro helms where dashboard has a 3-1/4 inch hole from
a previously mounted mechanical helm.
HA5468 Drill Jig for drilling mounting holes for SeaStar and SeaStar
Pro traditional tilt helms (HH5741, HH5742, HH5743). Also back
Mount Kit (HA5418). A 4-1/2 inch dashboard hole is required.
TOOLS
AUXP AUXS
HP HS PRS
XX/XX/05
TNK
HA5457
HA5456
To Next Page
Loading...
