SEASTAR and BAYSTAR Hydraulic Steering Systems
10-19
SeaStar
®
/BayStar
™
Power Purge Jr. is the quickest way to bleed a
SeaStar
®
/BayStar
™
system in the field and assure a rock-solid steering
feel every time!
The Power Purge Jr. reduces installation and warranty costs while
enhancing the quality of the boat to the end user. A typical manual fill
and purge takes the average experienced installer or service
technician about 30 minutes per boat — by using the Power Purge Jr.
this can be reduced to 10 minutes or less.
Advantages:
SeaStar Power Purge JR.
Part# HA5445-2
SeaStar Bleed Hose
Part# HA5438
INCLUDED IN HA5438
INCLUDED IN
HA5438
•
This kit is needed to properly
bleed the SeaStar Outboard
steering kit
•
Screws onto the SeaStar
and equivalent fluid to bleed
the SeaStar system
•
Makes for a clean bleed
when used properly
SeaStar Remote Fill
Part# HA6450
•
Can be used with ALL SeaStar
Helm pumps
•
Relocate your fill plug to a
more convenient or hidden
place
•
Steering feel is solid every time
•
Complete Fill & Purge in 10
minutes or less
•
Fast and efficient
•
Easy to operate
•
Screens contaminants from oil
•
Quick connect fittings
•
Convenient portable size
•
Convenient electrical hook-up
utilizing 12 volt boat battery
•
Optional Dual Cylinder Purging Kit
HA5461 available
•
Optional 50’ Hose Extension Kit
HA5462, for those longer runs
TOOLS AND TORQUE DATA SHEETS
SeaStar Front Mount
Gland Removal Tool
Part# 745225
•
Makes changing the end
glands on the front mount
cylinder easy.
•
Avoid damage to the gland
by using the proper tool.
•
Lightweight and durable.
requires 3/4" hole to be drilled
onto dash above helm pump.
NOTICE
To Next Page