Edgewater Networks 388CC - Page 290

4-4
Selection Guide
General Dimensions
HC5328 125-8EM
HC5326 BA150-7EM
CYLINDER CONNECTION DETAIL
FOR OMC (PART #HA5424)
CYLINDER CONNECTION DETAIL
FOR MERCURY
(QUICKSILVER PART #B98735A1)
12.08" (306.86 mm)
0.625" (15.88 mm)
8
.85" (224.79 mm)
1
2.5" (317.5 mm)
0.25"
(6.35 mm)
1.625" (41.28 mm)
5" (127mm) REQUIRED FOR
UNRESTRICTED MOUNTING
HC5332 135-7EM
STERNDRIVE STEERING
NOTICE
If engine outdrive is NOT equipped with
a torque tab on the underside of the
lower leg, one must be installed to
reduce prop torque.
NOTICE
DO NOT use a PRO Helm pump with this,
or any other unbalanced steering cylinder.