Edimax CV-7428nS User Manual

20
ESSID
Displays the current ESSID (the name used
to identify this wireless bridge).
Channel
Number
Displays the current wireless channel
number
Security
Displays the current wireless security
setting.
BSSID (MAC)
Displays the device’s MAC address. A MAC
address is a unique, fixed ID for this device,
it cannot be modified.
State
Displays the current status of the wireless
bridge.
IP Address
Displays the IP address of this device.
Subnet Mask
Displays the subnet mask of the IP address.
Default
Gateway
Displays the IP address of the default
gateway.
MAC address
Displays the MAC address of the LAN
interface.
III-2. iQ Setup
If you wish to perform the initial setup process again,
select iQ Setup to restart the setup process.
When you select “iQ Setup” from the menu you will see
the screen below. Please refer back to II-2. iQ Setup for
guidance on the iQ Setup process.

Edimax CV-7428nS Specifications

Power

power adapter voltage	DC 5V
power adapter current	1A

Operating Environment

humidity	10-90% (Non-condensing)
temperature range	0-40°C
temperature range in Fahrenheit	32 - 104°F

Wireless Standards

frequency band	2.4 GHz
IEEE 802.11n data rate	up to 300Mbps
IEEE 802.11g data rate	up to 54Mbps
IEEE 802.11b data rate	up to 11Mbps

Ports & Interfaces

LAN ports	5 x RJ-45
antenna type	2 x 2dBi external antennas
LED indicators	Power, Wireless, LAN ports

Weight and Dimensions

weight	155 grams
height	30 mm
width	127 mm
depth	96 mm