22
The descriptions of every setting in this menu will be given below:
Item Description
Region List Lists all existing motion detection regions. You can define
up to three pre-defined region.
Region Name When you define a new region by mouse cursor, a default
region name will appear here automatically (named by
the size of the region you defined). You can change the
name to the one you want to use by keyboard.
Sensitivity Define the sensitivity of motion detection. When the
sensitivity is lower, the IP camera will take a picture only
when a numerous changes in the area are detected. If
you want the IP camera to record all tiny changes in the
motion detection area you defined, use a higher
sensitivity setting.
Threshold When the threshold is high, the IP camera will take a
picture only when a numerous motion is detected. If you
want the IP camera to record any motion in the motion
detection area you defined, use a lower threshold setting.
Add Region When you defined a new region by mouse cursor, click
this button to add a new region to ‘Region List’, and use
the name listed at ‘Region Name’ as new region’s name.
Get snapshot If you moved the IP camera, or the objects that IP camera
faces to is moved, you can click this button to get a new
snapshot of the area that IP camera faces to, so you can
decide how to
When you finish with setting up motion detection region, click ‘OK’ to start motion
detection, or click ‘Cancel’ to discard all settings you just made, and motion detection
function will not be activated.
To Next Page
Loading...
