36
If the key length is 64-bit, you should input 10 HEX
characters or 5 ASCII characters, like 112233aabb (HEX)
or MYWEP (ASCII).
If the key length is 128-bit, you should input 26 HEX
characters or 13 ASCII characters, like
11223344556677889900abcdef (HEX) or
myweppassword (ASCII).
WEP Key Format Select the Key Format of WEP key here. Available
options are ‘HEX’ and ‘ASCII’.
When you select ‘HEX’ WEP key format, you can only
use numbers (0 to 9), and alphabet a to f as WEP key;
when you select ‘ASCII’ WEP key format, you can use all
alphanumerical characters, and is case sensitive.
Default Key Select the default key set that is IP camera should use
against the wireless access point when WEP encryption
is used.
Available options are 1 to 4.
WEP Key 1 Input the 1
st
set of WEP key here. At least a set of WEP
key is required and you should use 1
st
WEP key if you
only have one WEP key.
WEP Key 2 Input the 2
nd
set of WEP key here.
WEP Key 3 Input the 3
rd
set of WEP key here.
WEP Key 4 Input the 4
th
set of WEP key here.
Click ‘Apply’ to save settings and make the new settings take effect.
To Next Page
Loading...
