68
The descriptions of every setting in this menu will be given below:
Item Description
Wireless Connection Select ‘Enable’ to enable the wireless interface of this IP
camera; select ‘Disable’ to switch wireless interface off. If
the wireless interface is disabled, all setting items in this
tab will be grayed out.
Available Network Shows all wireless devices found, and their SSID (the
name of wireless device) and signal strength. If the SSID
of wireless device is hidden, the ‘SSID’ of the wireless
device will appear blank.
Refresh Click to search wireless devices again. Sometime a
wireless device will not be shown before you click ‘Refresh’
for several times.
Connect Connect to the selected wireless device in the list. If the
wireless device requires authentication / encryption, you’ll
be prompted to input required information.
Add to Profile Save selected wireless device to profile. However, if the
wireless device you selected requires authentication /
encryption, you need to edit the profile and input required
information before you can connect to the wireless device.
Add Create a new profile. You’ll be prompted to input these
information:
To Next Page
