DCP 350 User Manual
Pic.51 Connecting to USB port
If you are unable to find printer in local network, please
connect printer by USB. You can setup network by
USB.
When you click Refresh, you can find a printer
connected by USB as shown in the Pic.51.
You don’t need to install device driver for
network configuration by USB. Please ignore
messages related to device installation.
You can change values of “System
Management” only when you connect a printer
by USB. Please connect a printer by network to
use all of the functions of Netadmin.exe.
Pic.52 NetAdmin Log-in
Please select a proper printer and click “connect”.
Please enter password and click “OK”.
Default password is “admin”.
To Next Page
Loading...
