EDISecure DCP 350 - Page 29

User Manual Page 29
EDIsecure
®
DCP 350 User Manual
Pic.53 Dynamic IP configuration
If you setup network automatically, please
choose DHCP.
 Please select DHCP and click “Set
Configuration”.
 “DHCP” is default for EDIsecure
®
DCP 350
printer.
 DHCP server should be in local network to use
DHCP function.
 Static IP is recommended. DHCP server
assigns IP address automatically but this IP
address is temporary, so the IP address may be
changed. In this case, the network error may
occur in connecting to EDIsecure
®
DCP 350
network printer.
Pic.154 Static IP configuration
Please select “Static” for Static IP
configuration.
 Please enter values for “IP”, “Network Mask”,
and “Gateway”. Click “Set Configuration”.
 Please check IP address properly which does
not conflict with other devices.
 If you are not aware of static IP, please ask
network administrator for Static IP.
 We recommend using Static IP because it is
more stable for using the EDIsecure
®
DCP 350
network printer.