EDMI ES-10B - Page 12

ES-10B 4 Terminal Single Phase Residential Electricity
Meter - Product Guide
Copyright © 2019 EDMI Europe Ltd. All rights reserved
Version / Status: 1.1
Public
PAGE 12 OF 62
7.
GUID
8.
MID marking (M##) where ## is the last 2
digits of the year of manufacture
9.
MID Notified Body Number (Module D)
or (dependant on factory)
10.
WEEE Marking with year of Manufacture
anywhere on the device eg. Point 31.
11.
Nominal Frequency, Voltage, Maximum &
Nominal Current
50Hz 230V 0.25-5(100)A
12.
Battery marking and type symbols
13.
Accuracy class on the front of the device
Class B & 2(r)
14.
LED pulsing outputs (pulses per
fundamental unit)
1000 imp/kWh
1000 imp/kvarh
15.
Labelled buttons on the front of the unit to
show their function
16.
Single Phase connection marking
17.
Sign of insulating encased meter of
protective class II
18.
Utilisation category (UC)
UC3
19.
Rated impulse voltage rating (withstand
the transient voltage)
Cat III
4kV
20.
Reference to standards European
standard EN50470-3
EN 50470-3:2006
21.
Rated current of the Auxiliary Load
Switch
22.
Environmental Class marking
M1/E2
GUID 00-00-00-00-00-00-00
Ie = 2A