EDMI ES-10B - Message; Boost

ES-10B 4 Terminal Single Phase Residential Electricity
Meter - Product Guide
Copyright © 2019 EDMI Europe Ltd. All rights reserved
Version / Status: 1.1
Public
PAGE 41 OF 62
13.5.15.2 R-
Displays the Reactive export register in kVArh to 3DP (3 Decimal Point). It will need to
automatically scroll to accommodate any extra digits.
13.6 Message
When the meter receives a message, the Message enunciator on the main screen will be lit.
The Message menu option displays supplier messages. The message will automatically scroll
when you access this menu, but you can automatically scroll through it using the left/right UI
buttons.
When in this menu, the UI buttons perform the following functions:
Left / Right
Scroll up/down the message.
OK
Hold to open message, no effect on reading of message
Return
Return to Default Main Screen.
If you access the Message menu, and there is no active message, the screen will display:
13.7 Boost
Note! Boost functionality is a feature that is enabled by firmware. Thus this feature may be
unavailable depending on the firmware version of the meter.
The ES-10B will support the boost functionality of the electricity device. The boost functionality will
support the following message codes, resulting in the “Activation”, “Cancelation” or “Extension” of
the boost period.
R
-
2
1.
2
3
4
kVArh
<
N
O
N
E
>