EDMI ES-10B - Page 40

ES-10B 4 Terminal Single Phase Residential Electricity
Meter - Product Guide
Copyright © 2019 EDMI Europe Ltd. All rights reserved
Version / Status: 1.1
Public
PAGE 40 OF 62
Return
Return to parent menu.
13.5.13 Watt Hour
Displays the consumption in the same units as is stored in the meter. It will need to automatically
scroll to accommodate any extra digits.
The import and export values displayed in this screen are deemed to be legally relevant
measurement data, according to MID metering regulations.
Left / Right
No effect.
OK
No effect.
Return
Return to parent menu.
13.5.14 Mode
Displays the payment mode which is PIN protected (refer to section 7), which shall either be
“Credit” or “PAYG”, where PAYG means the meter is in prepayment mode.
When in this menu, the UI buttons perform the following actions:
Left / Right
No effect.
OK
No effect.
Return
Return to parent menu.
13.5.15 kVArh
This menu item shall contain 2 additional screens for the display of the reactive import and reactive
export. The import and export reactive values displayed in this menu are deemed to be legally
relevant measurement data, according to MID metering regulations.
13.5.15.1 R+
Displays the Reactive import register in kVArh to 3DP (3 Decimal Point). It will need to
automatically scroll to accommodate any extra digits.
M
O
D
E
C
R
E
D
I
T
R
+
3
4
1.
2
3
4
kVArh