ES-10B 4 Terminal Single Phase Residential Electricity
Meter - Product Guide
Copyright © 2019 EDMI Europe Ltd. All rights reserved
Version / Status: 1.1
Public
4 Handling of Meters
To ensure the longevity of ES-10B meters supplied by EDMI we ask for some steps to be followed
when handling meters.
4.1 Always use EDMI provided packaging
EDMI packaging is supplied with every meter, this packaging is designed to protect the meter from
environmental issues as well as protecting it from damage. This packaging should be used when
the meter is not in use or in transit between uses.
4.2 Meters should not be placed in environments that have a possibility of accelerating
environmental factors
It is imperative that the ES-10B meter is stored correctly. For example, meters should not be put
into a sealed plastic bag, when damp or have been on the ground. This can accelerate
condensation within the meter and cause issues in the later life of the meter.
4.3 Operating the meter without a Communication hub
When operating the meter, please determine if the meter has been supplied with a rubber bung or
hard ICHIS cover. If the meter is supplied with the rubber bung it has to be removed before testing,
being replaced by the ICHIS hard cover.
Note: If this meter is operated with a rubber bung or no ICHIS cover safety and performance may
be impacted. For best operating performance, always use the hard cover or a CH on top of the
meter.
To Next Page
Loading...
