EDMI ES-10B - Page 29

ES-10B 4 Terminal Single Phase Residential Electricity
Meter - Product Guide
Copyright © 2019 EDMI Europe Ltd. All rights reserved
Version / Status: 1.1
Public
PAGE 29 OF 62
After entering and selecting the fourth digit, the screen will display:
Press OK to confirm the PIN you have entered. The screen will displays:
After two seconds, the display returns to the parent menu.
If a PIN already exists, on entering the Set PIN menu item, the screen will display the prompt:
Using the left and right buttons, scroll through the digits 0-9 and press OK to select the digit. The
digits will be masked with an asterisk * symbol when selected.
If the PIN you enter is correct, follow the same procedure as you would to set a PIN if no PIN exists
(described above).
If the PIN you enter is incorrect, you will be given two more opportunities to enter the correct PIN. If
the PIN that you enter after the third attempt is incorrect, you will be locked out of the user interface
for one hour.
13.4.2 Remove an Existing PIN
On entering the RemvPIN menu, the screen will display the prompt:
Using the left and right buttons, scroll through the digits 0-9 and press OK to select the digit. The
digits will be masked with an asterisk * symbol when selected.
If the PIN you enter is correct, the screen will display the prompt:
P
I
N
*
*
*
_
O
K
T
O
C
O
N
F
I
R
M
P
I
N
:
S
A
V
E
D
E
N
T
E
R
P
I
N:
_
_
_
_
E
N
T
E
R
P
I
N:
_
_
_
_
R
E
A
D
Y
H
O
L
D
O
K