Accessing the configuration settings
After initial setup with the Fiery Setup Wizard, we recommend that you review the E300 configuration to make sure
the settings are optimized for your network and print environment.
When to review the configuration settings
We recommend reviewing the E300 settings in the following situations:
•
After initial setup with the Fiery Setup Wizard
•
If the E300 system software is installed or re-installed
•
If the network or print environment changes
Viewing and modifying the configuration settings
You can view and modify the E300 configuration settings through the following methods:
•
The E300 Setup feature on the printer control panel
The Setup feature provides access to a partial set of the configuration settings.
•
Configure in Command WorkStation
Command WorkStation can be accessed from a client computer.
•
Configure in WebTools
WebTools can be accessed from a client computer.
In Configure, you can find settings quickly by typing keywords into the Search bar at the top.
You can also view the configuration settings in two additional ways:
•
By saving the configuration settings as a file (see Configure Help).
•
By printing the configuration settings (see Print the Configuration page on page 27).
For a description of all the configuration settings, see Configure Help.
Configuration and Setup
Accessing the configuration settings
25
To Next Page
Loading...
Need help?
General
