Font Number
Designates the default font for the E300. To determine font numbers, print the PCL Font list. The standard fonts are
listed in order. The font numbers, however, are not displayed.
Settings:
0-999 (default is 0)
Append CR to LF
Specify whether to append a carriage return to each line feed.
Settings:
No (default)
Yes
Paper Size for System Pages
Specify the default set of paper sizes on which PCL system pages are printed.
Settings:
US (default in the United States)
Metric (default in all other countries)
Printer Default Personality
Sets the personality of the printer. To access this option, choose Configure > RIP > Printer Default Personality.
•
If set to Auto, the PDL type of incoming jobs is automatically detected and sent to the appropriate interpreter.
•
If set to PCL, incoming jobs are sent to the PCL interpreter. If set to PS, incoming jobs are sent to the PS
interpreter.
Settings:
Auto (default)
PCL
PS
Variable Data Printing (VDP) settings
To access VDP settings, choose Configure > RIP > VDP.
For information about configuring VDP search paths, see VDP search path on page 55.
FreeForm 1 Record Length
Defines the length of each record, either based on the number of pages in the variable job, or the number of pages in
the FreeForm Master.
Configuration and Setup
Configuring print job processing settings
47
To Next Page
Loading...
Need help?
General
