E-mail Log
Prints a list of recent e-mail activity.
Note: To print the E-mail Log, you must first enable the service.
Tools tab
The Tools tab allows you to perform tray alignment, perform calibration, and view the print instructions.
Access E300 Setup options from the printer control panel
You can use the Setup feature on the printer control panel to perform initial setup.
1 On the printer control panel, press the Home button.
2 Press the Fiery logo.
The E300 tabs appear.
3 Press the Info tab.
4 To access the configuration options, press Server Setup.
5
If you have not already logged in, log on with Administrator privileges: Select Administrator, enter the password,
and click Login.
The default Administrator password is Fiery.1 (case-sensitive).
Note: The Administrator login automatically times out after the time interval specified in setup. If the timeout
message displays, press OK.
After viewing or changing any settings on the tabs you can return to the main screen by pressing Cancel or Save
Changes.
Pressing Save Changes displays a dialog asking if you want to reboot the E300 or return to Setup. If preferred, you
can return to setup and reboot later. Changes are not implemented until the system is rebooted.
Server Name
Sets the name of the E300 on the network (15 characters maximum).
Note: If you set up more than one E300, do not assign them the same name.
IPv4 Address Type
Choose whether to allow the E300 to obtain its Ethernet IP address automatically by searching the network.
Settings:
Automatic (default)
Manual
Configuration and Setup
Accessing E300 options through the printer control panel
30
To Next Page
Loading...
Need help?
General
