EFI Fiery E300 - Print the Configuration Page

6 In the Certificate dialog box, on the General tab, click the Install Certificate button.
7 In the Certificate Import Wizard dialog box, click Next and then do the following:
a) Select Place all certificates in the following store and click Browse.
b) In the Select Certificate Store dialog box, select Trusted Root Certification Authorities then click OK.
8 Click Next.
9 If a security warning displays, click Yes.
10 Click Finish.
A pop-up displays and lets you know that the import was successful.
11
Reopen WebTools using the hostname of the E300. For example, https://hostname.
Note: If you use the IP address rather than the hostname, the untrusted connection messages still appear. You
must use the hostname name.
The URL now begins with https, the lock icon is green rather than red, and the lock icon is not crossed out.
Print the Configuration page
The Configuration page lists the settings currently used by the E300.
After you set up the E300, print the Configuration page to confirm your settings. Post the current Configuration
page near the E300 for quick reference. Users need the information on this page, such as the current printer default
settings.
You can print the Configuration page the following ways:
•
In Command WorkStation, click File > Print > Server Configuration.
Configuration and Setup
Accessing the configuration settings
27